Labotect C200 CO₂ Incubator Laboratory Incubator Troubleshooting Guide

The Labotect C200 CO₂ Incubator is one of the most used laboratory devices for cell culture and microbiological applications. Like any other laboratory incubator, the operation may be affected under certain conditions, such as gas supply, temperature, and maintenance. This guide helps to troubleshoot common problems with ease.

Check the similar product at Ekra Cargo

CO₂ concentration may not be achieved as desired, and this may be because the CO₂ supply is empty, the gas pressure is wrong, or there is a leak in the gas line.

There may be a problem with the temperature, and this may be because the door is opened too often, as well as insufficient warm-up time.

If there is low or high humidity, check the water pan, as this may be the cause. It is recommended that you use only pure water and clean the pan regularly to avoid problems with evaporation.

If there is an alarm problem, you may restart the incubator and recalibrate the sensors. However, you may need to check with authorized service staff for persistent problems.

Check the product at Ekra Cargo

Maintenance and operation play a critical role in extending the life of the incubator, as recommended for the Labotect C200 CO₂ Incubator.